SVS Subspace Forums
How to run Subspace/Continuum on a Mac - Printable Version

+- SVS Subspace Forums (http://forum.svssubspace.com)
+-- Forum: Chaos Zone (http://forum.svssubspace.com/forumdisplay.php?fid=59)
+--- Forum: Chaos Discussion (http://forum.svssubspace.com/forumdisplay.php?fid=27)
+--- Thread: How to run Subspace/Continuum on a Mac (/showthread.php?tid=14026)

How to run Subspace/Continuum on a Mac - DeathByMullet - 01-06-2016

I moved, wife had a baby and no p.c. blah blah. Have an old Mac Laptop and I wanna play 4s again, anyone have a link
that I can download this game on my Mac?

RE: Can't log into chaos - qwing - 01-06-2016

http://wonko.com/post/how-to-run-continuum-on-a-mac

RE: Can't log into chaos - DeathByMullet - 01-07-2016

Thanks man I will give it a shot.

RE: Can't log into chaos - qwing - 01-09-2016

If the file int hat link doens't work, the link here should: http://www.extreme-games.net/downloads/
MAke sure to refresh the zone lsit etc after downloading and running it.

RE: How to run Subspace/Continuum on a Mac - SolarHydro - 09-03-2017

Hello all,

2017 MacOS Sierra -and El Capitan before it - seems to have invalidated this solution, with new security mechanisms.

I tried various Wine, Winery, XQuartz solutions, for about an hour, to no avail.

Any input is welcome (virtualisation and bootcamp are probably options, I had hoped for something easier).

Solar Hydro

RE: How to run Subspace/Continuum on a Mac - SolarHydro - 09-10-2017

(09-03-2017, 10:40 PM)SolarHydro Wrote:  Hello all,

2017 MacOS Sierra -and El Capitan before it - seems to have invalidated this solution, with new security mechanisms.

I tried various Wine, Winery, XQuartz solutions, for about an hour, to no avail.

Any input is welcome (virtualisation and bootcamp are probably options, I had hoped for something easier).

Solar Hydro

Hello again, 

Managed to install it on my friend's Mac running an Yosemite.
However, just a few zones show in green (even after I changed the directory server).
And we're stuck after the 5th hop on traceroute, i.e. stuck in Austria and can't reach servers outside the country.

Any ideas, by 3pm EDT today, would be most appreciated.

Thank you.

Sol

RE: How to run Subspace/Continuum on a Mac - Peeking Duck? - 09-11-2017

(09-10-2017, 05:24 PM)SolarHydro Wrote:  
(09-03-2017, 10:40 PM)SolarHydro Wrote:  Hello all,

2017 MacOS Sierra -and El Capitan before it - seems to have invalidated this solution, with new security mechanisms.

I tried various Wine, Winery, XQuartz solutions, for about an hour, to no avail.

Any input is welcome (virtualisation and bootcamp are probably options, I had hoped for something easier).

Solar Hydro

Hello again, 

Managed to install it on my friend's Mac running an Yosemite.
However, just a few zones show in green (even after I changed the directory server).
And we're stuck after the 5th hop on traceroute, i.e. stuck in Austria and can't reach servers outside the country.

Any ideas, by 3pm EDT today, would be most appreciated.

Thank you.

Sol

Ask Kdak. He seems to be the most knowledgeable with SS on Mac.

RE: How to run Subspace/Continuum on a Mac - Odakscieldja - 09-12-2017

(09-03-2017, 10:40 PM)SolarHydro Wrote:  Hello all,

2017 MacOS Sierra -and El Capitan before it - seems to have invalidated this solution, with new security mechanisms.

I tried various Wine, Winery, XQuartz solutions, for about an hour, to no avail.

Any input is welcome (virtualisation and bootcamp are probably options, I had hoped for something easier).

Solar Hydro


Hello,

Here's how I got it working, though I didn't test this solution with anyone else yet. I am on a MacBook Pro (Retina, 15-inch, Early 2013).

After updating to macOS 10.12 Sierra from macOS 10.10 Yosemite, Subspace/Continuum stopped working with this error:

The application X11 could not be opened.
An error occurred while starting the X11 server: "Failed to activate core devices."
Click Quit to quit X11. Click Report to see more details or send a report to Apple.


I went google searching, and found some links (see "relevant links" at end of post) that said to use Porting Kit, which I did.
Here are the steps I took:
   0. Download windows (not mac) "Continuum040Setup.exe" file for Step 6 (i got it from http://www.trenchwars.org/index.php?v=downloads).
   1. In Porting Kit, go to the "Library" tab.
   2. Select "Server" (as opposed to "Local"), which will load apps available from the server.
   3. Select the first option, which should be "Wrapper (New Custom Port)".
   4. Name the app ("Subspace", "Continuum", "pancakes", whatever you want).
   5. Cancel the Mono and Gecko installations if prompted to install them (if you accidentally install it, it's no big deal, a forum post said that it just takes up a little extra disk space, and it is also only installed local to the app wrapper anyway, so deleting the wrapper would delete the Mono/Gecko installation. I got this info from http://portingkit.com/smf/index.php?topic=259.0).
   6. Select the "Continuum040Setup.exe" file when prompted.
   7. Install the app with the windows installer (which installs it within the Wrapper).
   8. DONE. At this point, a clean installation of Subspace/Continuum is playable on macOS 10.12 Sierra (and maybe others).
   9. OPTIONAL: If you're fine with a clean installation, you're already all set. If you'd like all your stuff from the old installation (profiles, zones, chats, macros, map downloads, special graphics, etc), you can simply copy and paste the entire Continuum folder (or just parts of it, though making sure to keep the same directory structure and file locations) from your old mac Continuum.app package, into the new Wrapper [whatever-name-you-chose].app package, and it'll still work. And I imagine you can similarly copy an old windows installation as well, if coming from windows, though haven't tested that.

Note: As with other mac installations, there are some quirks and bugs, but mostly minor ones. For example, I have to select the resolution from the dropdown everytime I enter (it doesn't save the selection for some reason, even if you set it up in your profile), and the game sometimes crashes when I try to enter, though it usually works on the second try. And if I remember correctly, you may have to play around with some settings to get the chat-only window working when the game is minimized.


Relevant links:

http://www.trenchwars.org/index.php?v=downloads (to download the Continuum040Setup.exe file)
http://forums.trenchwars.org/showthread.php?43455-New-Version-of-Subspace-on-a-Mac
http://forums.trenchwars.org/showthread.php?45947-How-to-Play-TW-on-Mac-OS-X (to find out about Porting Kit)

RE: How to run Subspace/Continuum on a Mac - spiffyguy - 02-21-2018

Hi Guys,

I updated the Continuum Wineskin Wrapper to use Wine 3.0. I have tested on macOS Sierra and it works great. Also tested this on a 10.6 Snow Leopard machine and it worked as well.

I have not tested on High Sierra yet but I will soon.

Here is the link for the 3rd mac version I have made (hence 'c'): Continuum_040c_Mac.zip

Let me know if it works for you! Not that I can promise soon but I will work on a 64 bit version next for future compatibility past High Sierra.

- Matt